ODBC. ODBC (Open DataBase Connectivity) is a set of conventions introduced by Microsoft that allows access to information from a wide range of databases (e.g., MS Access, Oracle) and performing queries via SQL.
Odds Ratio. The odds ratio is useful in the interpretation of the results of Logistic regression (see Neter, Wasserman, and Kutner, 1989) and is computed from a 2x2 classification table that displays the predicted and observed classification of cases for a binary dependent variable:
(f11 * f22)/(f12 * f21)
where fij represents the respective frequencies in the 2x2 table.
OLE DB. OLE DB (Object Linking and Embedding Database) is a set of conventions introduced by Microsoft that allows access to information from a wide range of databases (e.g., MS Access, Oracle). OLE DB is a database architecture that provides universal data integration over an enterprise's network, from mainframe to desktop, regardless of the data type. OLE DB is a more generalized and more efficient strategy for data access than ODBC because it allows access to more types of data and is based on the Component Object Model (COM).
On-Line Analytic Processing (OLAP) (or Fast Analysis of Shared Multidimensional Information - FASMI). The term On-Line Analytic Processing refers to technology that allows users of multidimensional databases to generate on-line descriptive or comparative summaries ("views") of data and other analytic queries.
For more information, see On-Line Analytic Processing (OLAP); see also, Data Warehousing and Data Mining techniques.
One-Off (in Neural Networks). A case typed in and submitted to the neural network as a one-off procedure (not part of a data set, and not used in training). See, Neural Networks.
One-of-N Encoding (in Neural Networks). Representing a nominal variable using a set of input or output units, one unit for each possible nominal value. During training, one of the units will be on and the others off. See, Neural Networks.
One-Sample t-Test. See, t-Test (for Independent and Dependent Samples).
"One-Sided" Ranges or Error Bars in Range Plots. In order to display a "one-sided" range (relative to the mid-point) or an error bar that extends in only one direction, set the respective values of the variable defining the range boundary to 0 (when the Relative to the Mid-point style is selected) or the mid-point (when the Absolute style is selected).
Operating Characteristic Curves, for Quality Control Charts. A common supplementary plot to standard quality control charts is the so-called operating characteristic or OC curve. One question that comes to mind when using standard variable or attribute charts is how sensitive is the current quality control procedure. Put in more specific terms, how likely is it that you will not find a sample (e.g., a mean in an X-bar chart) outside the control limits (i.e., accept the production process as "in control"), when, in fact, it has shifted by a certain amount? This probability is usually referred to as the b (beta) error probability, that is, the probability of erroneously accepting a process (mean, mean proportion, mean rate defectives, etc.) as being "in control."
Operating characteristic curves are extremely useful for exploring the power of the quality control procedure. The actual decision concerning sample sizes should depend not only on the cost of implementing the plan (e.g., cost per item sampled), but also on the costs resulting from not detecting quality problems. The OC curve allows the engineer to estimate the probabilities of not detecting shifts of certain sizes in the production quality.
For more information, see also Operating Characteristic Curves.
Ordinal Multinomial Distribution. If the categories for a multinomial response variable can be ordered, then the distribution of that variable is referred to as ordinal multinomial. For example, if in a survey the responses to a question are recorded such that respondents have to choose from the pre-arranged categories "Strongly agree," "Agree," "Neither agree nor disagree," "Disagree," and "Strongly disagree," then the counts (number of respondents) that endorsed the different categories would follow an ordinal multinomial distribution (since the response categories are ordered with respect to increasing degrees of disagreement).
Specialized methods for analyzing multinomial and ordinal multinomial response variables can be found in Generalized Linear Models.
Ordinal Scale. The ordinal scale of measurement represents the ranks of a variable's values. Values measured on an ordinal scale contain information about their relationship to other values only in terms of whether they are "greater than" or "less than" other values but not in terms of "how much greater" or "how much smaller."
See also, Measurement scales.
Outer Arrays. In Taguchi experimental design methodology, the repeated measurements of the response variable are often taken in a systematic fashion, with the goal to manipulate noise factors. The levels of those factors are then arranged in a so-called outer array, i.e., an (orthogonal) experimental design. However, usually the repeated measurements are placed in separate columns in the data spreadsheet (i.e., each is a different variable); thus the index i (in the formulas for smaller-the-better, larger-the-better, and signed target) runs across the columns or variables in the data spreadsheet, or the levels of the factors in the outer array.
See Signal-to-Noise (S/N) Ratios for more details.
Outliers. Outliers are atypical (by definition), infrequent observations; data points that do not appear to follow the characteristic distribution of the rest of the data. These may reflect genuine properties of the underlying phenomenon (variable), or be due to measurement errors or other anomalies that should not be modeled. In contrast, an inlier is an observation that does follow the characteristic distibution of the rest of the data, but is an error. See Inlier.
Because of the way in which the regression line is determined in Multiple Regression (especially the fact that it is based on minimizing not the sum of simple distances but the sum of squares of distances of data points from the line), outliers have a profound influence on the slope of the regression line (see the animation below) and consequently on the value of the correlation coefficient. A single outlier is capable of considerably changing the slope of the regression line and, consequently, the value of the correlation. Note that, as shown in the illustration, just one outlier can be entirely responsible for a high value of the correlation that otherwise (without the outlier) would be close to zero. Needless to say, we should never base important conclusions on the value of the correlation coefficient alone (i.e., examining the respective scatterplot is always recommended).
Note that if the sample size is relatively small, then including or excluding specific data points that are not as clearly "outliers" as the one shown in the previous example may have a profound influence on the regression line (and the correlation coefficient). This is illustrated in the following example where we call the points being excluded "outliers"; we may argue, however, that they are not outliers but rather extreme values.
Typically, we believe that outliers represent a random error that we want to be able to control. Needless to say, outliers may not only artificially increase the value of a correlation coefficient, but they can also decrease the value of a "legitimate" correlation.
See also Confidence Ellipse.
Outliers (in Box Plots). Values that are "far" from the middle of the distribution are referred to as outliers and extreme values if they meet certain conditions.
A data point is deemed to be an outlier if the following conditions hold:
data point value > UBV + *o.c.*(UBV - LBV)
data point value < LBV - *o.c.*(UBV - LBV)
UBV is the upper value of the box in the box plot (e.g., the mean + standard error or the 75th percentile).
LBV is the lower value of the box in the box plot (e.g., the mean - standard error or the 25th percentile).
o.c. is the outlier coefficient.
For example, the following diagram illustrates the ranges of outliers and extremes in the "classic" box and whisker plot (for more information about box plots, see Tukey, 1977).
Overdispersion. The term Overdispersion refers to the condition when the variance of an observed dependent (response) variable exceeds the nominal variance, given the respective assumed distribution. This condition occurs frequently when fitting generalized linear models to categorical response variables, and the assumed distribution is binomial, multinomial, ordinal multinomial, or Poisson. When overdispersion occurs, the standard errors of the parameter estimates and related statistics (e.g., standard errors of predicted and residual statistics) must be computed taking into account the overdispersion.
For details, see Agresti (1996); see also Generalized Linear/Nonlinear Models.
Overfitting. When attempting to fit a curve to a set of data points, producing a curve with high curvature that fits the data points well but does not model the underlying function well, its shape being distorted by the noise inherent in the data.
See also, Neural Networks.
Overlearning (in Neural Networks). When an iterative training algorithm is run, overfitting that occurs when the algorithm is run for too long (and the network is too complex for the problem or the available quantity of data).
See also, Neural Networks.
Overparameterized Model. An overparameterized model uses the indicator variable approach to represent effects for categorical predictor variables in general linear models and generalized linear/nonlinear models. To illustrate indicator variable coding, suppose that a categorical predictor variable called Gender has two levels (i.e., Male and Female). A separate continuous predictor variable would be coded for each group identified by the categorical predictor variable. Females might be assigned a value of 1 and Males a value of 0 on a first predictor variable identifying membership in the female Gender group, and males would then be assigned a value of 1 and females a value of 0 on a second predictor variable identifying membership in the male Gender group.
Note that this method of coding for categorical predictor variables will almost always lead to design matrices with redundant columns in general linear models and generalized linear/nonlinear models, and thus requires a generalized inverse for solving the normal equations. As such, this method is often called the overparameterized model for representing categorical predictor variables, because it results in more columns in the design matrix than are necessary for determining the relationships of the categorical predictor variables to responses on the dependent variables.
See also categorical predictor variable, design matrix; or General Linear Models.